EXPLORE THIS CATEGORY
Products & requirements.
Select a product to begin an enquiry. Have a detailed material
list? Share it with our team.
MS Pipe
Mild steel round pipes are used in fabrication, frames and
general engineering assemblies. Share the outside diameter, wall
thickness, length and grade; fluid, pressure or other specialist
applications require an explicitly suitable standard and
specification.
Product specifications
MS Pipe specification guide
| Product form |
Round hollow section |
| Material / condition |
Mild steel |
| Supplier-stated circular range |
15 NB–175 NB (nominal bore; not outside diameter).
Confirm wall thickness and length.
|
| Referenced standard |
IS 1161:2014 — confirm applicable edition and
certification for the order.
|
| Grades for enquiry |
YSt 210, YSt 240, YSt 310, YSt 355 — confirm
grade/standard pairing and mill test certificate with
quotation.
|
| Dimensions to specify |
Actual outside diameter × wall thickness (mm) |
| Length / order details |
Required length; confirm plain, threaded or bevelled
ends
|
| Grade & standard |
State the required grade and applicable standard or
approved drawing.
|
| Finish & tolerances |
Confirm the required finish/coating and dimensional
tolerances with the quotation.
|
| Brand & documentation |
Request the required mill/brand, inspection and
material documents when enquiring.
|
Available sizes, grades, lengths, brands and documents are
confirmed against your enquiry.
MS Square Pipe
Square steel hollow sections are used in fabricated frames,
gates, furniture and structural assemblies. Specify the outside
dimensions, wall thickness, length, grade and finish, with
drawings where the section forms part of a designed structure.
Product specifications
MS Square Pipe specification guide
| Product form |
Square or rectangular hollow section |
| Material / condition |
Steel |
| Supplier-stated square range |
20 × 20 mm–150 × 150 mm; confirm wall thickness and
length.
|
| Supplier-stated rectangular range |
40 × 20 mm–200 × 100 mm; confirm wall thickness and
length.
|
| Referenced standard |
IS 4923:2017 — confirm applicable edition and
certification for the order.
|
| Grades for enquiry |
YSt 210, YSt 240, YSt 310, YSt 355 — confirm
grade/standard pairing and mill test certificate with
quotation.
|
| Dimensions to specify |
Outside width × height × wall thickness (mm) |
| Length / order details |
Required tube lengths and cutting requirements |
| Grade & standard |
State the required grade and applicable standard or
approved drawing.
|
| Finish & tolerances |
Confirm the required finish/coating and dimensional
tolerances with the quotation.
|
| Brand & documentation |
Request the required mill/brand, inspection and
material documents when enquiring.
|
Available sizes, grades, lengths, brands and documents are
confirmed against your enquiry.
HR Pipes & Tubes
Hot-rolled steel pipes and tubes are used in fabrication,
structural assemblies and general engineering. Enquire with the
section shape, outside dimensions, wall thickness, grade, length
and applicable standard for your intended use.
Product specifications
HR Pipes & Tubes specification guide
| Product form |
Round or specified hollow section |
| Material / condition |
Hot-rolled steel |
| Dimensions to specify |
Section shape, outside dimensions and wall thickness
(mm)
|
| Length / order details |
Required length, end condition and applicable product
standard
|
| Grade & standard |
State the required grade and applicable standard or
approved drawing.
|
| Finish & tolerances |
Confirm the required finish/coating and dimensional
tolerances with the quotation.
|
| Brand & documentation |
Request the required mill/brand, inspection and
material documents when enquiring.
|
Available sizes, grades, lengths, brands and documents are
confirmed against your enquiry.
CR Pipes
Cold-rolled steel tubes are used in furniture, light fabrication
and components where dimensions and finish are important. Share
the tube shape, outside dimensions, wall thickness, grade,
length and surface requirements for the application.
Product specifications
CR Pipes specification guide
| Product form |
Round or specified hollow section |
| Material / condition |
Cold-rolled steel |
| Dimensions to specify |
Section shape, outside dimensions and wall thickness
(mm)
|
| Length / order details |
Required length, tolerances and surface condition
|
| Grade & standard |
State the required grade and applicable standard or
approved drawing.
|
| Finish & tolerances |
Confirm the required finish/coating and dimensional
tolerances with the quotation.
|
| Brand & documentation |
Request the required mill/brand, inspection and
material documents when enquiring.
|
Available sizes, grades, lengths, brands and documents are
confirmed against your enquiry.
GI Pipes
Galvanised iron pipes have a zinc-coated surface and are used in
specified fabrication and service applications. Confirm the
outside diameter, wall thickness or class, grade, end connection
and coating requirements; suitability depends on the intended
service.
Product specifications
GI Pipes specification guide
| Product form |
Zinc-coated round pipe |
| Material / condition |
Galvanised steel |
| Dimensions to specify |
Outside diameter and wall thickness or specified pipe
class
|
| Length / order details |
Required length, coating requirement and end
connection
|
| Grade & standard |
State the required grade and applicable standard or
approved drawing.
|
| Finish & tolerances |
Confirm the required finish/coating and dimensional
tolerances with the quotation.
|
| Brand & documentation |
Request the required mill/brand, inspection and
material documents when enquiring.
|
Available sizes, grades, lengths, brands and documents are
confirmed against your enquiry.
GP Pipes
GP pipes and tubes are generally formed from pre-galvanised
strip for light framing and fabrication. Specify the section
shape, outside dimensions, thickness, length and coating
requirements, including any project requirements for weld-area
protection.
Product specifications
GP Pipes specification guide
| Product form |
Pre-galvanised hollow section |
| Material / condition |
Pre-galvanised steel strip |
| Dimensions to specify |
Section shape, outside dimensions and wall thickness
(mm)
|
| Length / order details |
Required length; confirm coating and weld-area
requirements
|
| Grade & standard |
State the required grade and applicable standard or
approved drawing.
|
| Finish & tolerances |
Confirm the required finish/coating and dimensional
tolerances with the quotation.
|
| Brand & documentation |
Request the required mill/brand, inspection and
material documents when enquiring.
|
Available sizes, grades, lengths, brands and documents are
confirmed against your enquiry.
MS Strip
Mild steel strip is flat steel supplied in narrower widths for
fabrication, forming and further processing. Send the width,
thickness, grade and quantity, and confirm whether straight
lengths or coil form are required.
Product specifications
MS Strip specification guide
| Product form |
Flat strip in specified supply form |
| Material / condition |
Mild steel |
| Dimensions to specify |
Width × thickness (mm) |
| Length / order details |
Specify coil or straight length, length/coil details
and quantity
|
| Grade & standard |
State the required grade and applicable standard or
approved drawing.
|
| Finish & tolerances |
Confirm the required finish/coating and dimensional
tolerances with the quotation.
|
| Brand & documentation |
Request the required mill/brand, inspection and
material documents when enquiring.
|
Available sizes, grades, lengths, brands and documents are
confirmed against your enquiry.