IRON & STEEL SUPPLY / RAIPUR, CHHATTISGARHCall us: +91 88714 63799
11 CATEGORIES / ONE CONVERSATION

Steel for every stage.

Explore the range. Tell us what your project needs.

11 categories · Explore products below

Illustrative product images. Confirm dimensions, grade and finish with your quotation.

CATEGORY 01

TMT & Construction Steel

Reinforcement and essentials for the build ahead.

View category
Illustrative TMT Bar product photograph

TMT Bar

Thermo-mechanically treated reinforcement bars are used in reinforced concrete foundations, columns, beams and slabs. Share the bar diameter, specified grade, length and quantity so Hariom can discuss supply for your construction requirement.

Product specifications
TMT Bar specification guide
Product form Ribbed reinforcing bar
Material / condition Reinforcing steel
Dimensions to specify Nominal bar diameter (mm)
Length / order details Required bar length and number of bars or tonnes
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Dowel Bar product photograph

Dowel Bar

Dowel bars transfer loads across joints while allowing the movement specified in a concrete pavement design. Enquire with the bar diameter, length, steel grade, coating or sleeve requirements and approved project drawing.

Product specifications
Dowel Bar specification guide
Product form Smooth round dowel bar
Material / condition Steel
Dimensions to specify Diameter × length (mm)
Length / order details Required length; confirm end preparation, sleeves or coating
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative MS Round product photograph

MS Round

Solid mild steel round bars are used for general fabrication, supports, pins and engineering components. Specify the diameter, length, material grade and quantity; machining or load-bearing applications should follow the required project specification.

Product specifications
MS Round specification guide
Product form Solid round bar
Material / condition Mild steel
Dimensions to specify Diameter (mm)
Length / order details Required bar length and quantity
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Thread Rods product photograph

Thread Rods

Threaded rods provide an adjustable connection for assemblies, supports and anchoring arrangements. Share the diameter, thread pitch, length, strength grade and finish, together with matching nut or washer requirements.

Product specifications
Thread Rods specification guide
Product form Fully threaded rod
Material / condition Steel; strength grade to be specified
Dimensions to specify Thread diameter × pitch × overall length (mm)
Length / order details Required thread system, length and matching hardware
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Foundation Bolts product photograph

Foundation Bolts

Foundation bolts connect equipment bases or structural base plates to concrete foundations. Send the approved bolt drawing, diameter, embedment and overall length, bend or head form, grade, finish and quantities for your anchoring enquiry.

Product specifications
Foundation Bolts specification guide
Product form Drawing-defined anchor bolt
Material / condition Steel; bolt grade to be specified
Dimensions to specify Diameter, overall length, embedment and bend/head dimensions (mm)
Length / order details Approved bolt drawing; nuts, washers and finish requirements
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

CATEGORY 02

Heavy Structure

Sections for demanding structural requirements.

View category
Illustrative H Beam product photograph

H Beam

H-shaped steel sections provide broad flanges for columns, frames and other structural assemblies. Enquire with the section designation, depth, flange width, web and flange thickness, grade and required lengths from your structural design.

Product specifications
H Beam specification guide
Product form H-shaped wide-flange section
Material / condition Steel
Dimensions to specify Section designation; depth, flange width, web/flange thickness (mm)
Length / order details Section lengths and quantity or tonnage
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative I Beam product photograph

I Beam

I-section beams are used in building frames, industrial structures and fabricated supports. Specify the section designation or dimensions, material grade, length and quantity; the required section capacity should come from your project design.

Product specifications
I Beam specification guide
Product form I-shaped beam section
Material / condition Steel
Dimensions to specify Section designation; depth, flange width, web/flange thickness (mm)
Length / order details Section lengths and quantity or tonnage
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative MS Channel product photograph

MS Channel

Mild steel channels have a C-shaped cross-section used in framing, support members and fabrication. Share the channel designation, dimensions, thickness, grade and length so the section can be matched to your material list.

Product specifications
MS Channel specification guide
Product form Open channel section
Material / condition Mild steel
Dimensions to specify Section designation; depth, flange width and thickness (mm)
Length / order details Required lengths; include cutting details if applicable
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative MS Angle product photograph

MS Angle

L-shaped mild steel angles are used for brackets, bracing, frames and fabrication work. Specify equal or unequal legs, leg dimensions, thickness, grade and cut length, with any drilling or fabrication details required for the quotation.

Product specifications
MS Angle specification guide
Product form L-shaped angle section
Material / condition Mild steel
Dimensions to specify Equal/unequal leg dimensions × thickness (mm)
Length / order details Required length; confirm leg orientation and fabrication details
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative MS Rail product photograph

MS Rail

Steel rail sections are used in selected industrial track and material-handling applications. Share the exact rail profile or drawing, section weight, grade, length and intended use so the supply enquiry reflects your project requirements.

Product specifications
MS Rail specification guide
Product form Rail section to specified profile
Material / condition Steel
Dimensions to specify Rail designation/profile, section weight and dimensions
Length / order details Required length and intended industrial application
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

CATEGORY 03

Light & Medium Structure

Versatile sections for everyday fabrication.

View category
Illustrative Gate Channel product photograph

Gate Channel

Gate channels are steel profiles used in gate frames, guides and related fabrication assemblies. Send the profile drawing or cross-section, dimensions, thickness and length, including the intended gate arrangement and finish requirements.

Product specifications
Gate Channel specification guide
Product form Gate channel profile
Material / condition Steel
Dimensions to specify Profile width, depth and thickness (mm)
Length / order details Profile drawing, required lengths and finish
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Z Angle product photograph

Z Angle

Z-shaped steel profiles are used where an offset section is required for framing, supports or fabrication. Confirm the profile geometry with a drawing, along with thickness, grade, length and any coating requirements.

Product specifications
Z Angle specification guide
Product form Z-shaped section
Material / condition Steel
Dimensions to specify Flange dimensions, depth and thickness (mm)
Length / order details Drawing-defined geometry and required lengths
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative T Angle product photograph

T Angle

T-shaped steel sections are used for framing, stiffeners, supports and general fabrication. Specify the flange width, section depth, web and flange thickness, length and grade, or share the required section drawing.

Product specifications
T Angle specification guide
Product form T-shaped section
Material / condition Steel
Dimensions to specify Flange width, depth and web/flange thickness (mm)
Length / order details Required section lengths and quantity
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Slotted Angle product photograph

Slotted Angle

Slotted angles have regularly spaced openings for bolted racks, shelving and light framing assemblies. Enquire with the leg dimensions, thickness, slot pattern, finish and length; loading and bracing should follow the assembly design.

Product specifications
Slotted Angle specification guide
Product form Perforated L-shaped section
Material / condition Steel
Dimensions to specify Leg dimensions × thickness; slot size and spacing (mm)
Length / order details Required length and slot pattern; use the assembly design
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative MS Flat product photograph

MS Flat

Mild steel flat bars have a rectangular cross-section suited to straps, brackets, grills and general fabrication. Share the width, thickness, length, grade and quantity, plus any cutting or finishing requirements.

Product specifications
MS Flat specification guide
Product form Solid rectangular flat bar
Material / condition Mild steel
Dimensions to specify Width × thickness (mm)
Length / order details Required bar length and cutting requirements
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Bright Bar product photograph

Bright Bar

Bright bars are finished steel bars used where dimensional consistency and surface finish matter in machining or component manufacture. Confirm the steel grade, cross-section, size, tolerance, length and required finish before ordering.

Product specifications
Bright Bar specification guide
Product form Finished solid bar
Material / condition Steel; grade and condition to be specified
Dimensions to specify Shape and diameter, side size or across-flats dimension (mm)
Length / order details Length, dimensional tolerance and surface finish
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative C Purlins product photograph

C Purlins

C-shaped steel purlins are used as secondary members in roof and wall framing. Specify the section depth, flange and lip dimensions, thickness, grade, coating and hole layout against the building or support-system design.

Product specifications
C Purlins specification guide
Product form Cold-formed C-shaped purlin
Material / condition Steel
Dimensions to specify Depth, flange/lip dimensions and thickness (mm)
Length / order details Lengths, hole positions and profile drawing
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Z Purlins product photograph

Z Purlins

Z-shaped purlins are used in roof and wall framing, including designed systems with overlapping joints. Send the section dimensions, thickness, grade, coating, lengths and punching details; laps and connections depend on the structural design.

Product specifications
Z Purlins specification guide
Product form Cold-formed Z-shaped purlin
Material / condition Steel
Dimensions to specify Depth, flange/lip dimensions and thickness (mm)
Length / order details Lengths, punching details and lap requirements from the design
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Solar Purlins product photograph

Solar Purlins

Steel purlins and support profiles form part of solar mounting structures. Enquire using the approved mounting drawing, section dimensions, thickness, coating, hole pattern and lengths so material selection follows the site and system design.

Product specifications
Solar Purlins specification guide
Product form Drawing-defined solar support profile
Material / condition Steel
Dimensions to specify Cross-section dimensions, thickness and hole pattern (mm)
Length / order details Approved mounting drawing, lengths and coating requirements
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

CATEGORY 04

Pipes & Hollow Sections

Round, square and rectangular. Ready for your plans.

View category
Illustrative MS Pipe product photograph

MS Pipe

Mild steel round pipes are used in fabrication, frames and general engineering assemblies. Share the outside diameter, wall thickness, length and grade; fluid, pressure or other specialist applications require an explicitly suitable standard and specification.

Product specifications
MS Pipe specification guide
Product form Round hollow section
Material / condition Mild steel
Supplier-stated circular range 15 NB–175 NB (nominal bore; not outside diameter). Confirm wall thickness and length.
Referenced standard IS 1161:2014 — confirm applicable edition and certification for the order.
Grades for enquiry YSt 210, YSt 240, YSt 310, YSt 355 — confirm grade/standard pairing and mill test certificate with quotation.
Dimensions to specify Actual outside diameter × wall thickness (mm)
Length / order details Required length; confirm plain, threaded or bevelled ends
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative MS Square Pipe product photograph

MS Square Pipe

Square steel hollow sections are used in fabricated frames, gates, furniture and structural assemblies. Specify the outside dimensions, wall thickness, length, grade and finish, with drawings where the section forms part of a designed structure.

Product specifications
MS Square Pipe specification guide
Product form Square or rectangular hollow section
Material / condition Steel
Supplier-stated square range 20 × 20 mm–150 × 150 mm; confirm wall thickness and length.
Supplier-stated rectangular range 40 × 20 mm–200 × 100 mm; confirm wall thickness and length.
Referenced standard IS 4923:2017 — confirm applicable edition and certification for the order.
Grades for enquiry YSt 210, YSt 240, YSt 310, YSt 355 — confirm grade/standard pairing and mill test certificate with quotation.
Dimensions to specify Outside width × height × wall thickness (mm)
Length / order details Required tube lengths and cutting requirements
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative HR Pipes & Tubes product photograph

HR Pipes & Tubes

Hot-rolled steel pipes and tubes are used in fabrication, structural assemblies and general engineering. Enquire with the section shape, outside dimensions, wall thickness, grade, length and applicable standard for your intended use.

Product specifications
HR Pipes & Tubes specification guide
Product form Round or specified hollow section
Material / condition Hot-rolled steel
Dimensions to specify Section shape, outside dimensions and wall thickness (mm)
Length / order details Required length, end condition and applicable product standard
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative CR Pipes product photograph

CR Pipes

Cold-rolled steel tubes are used in furniture, light fabrication and components where dimensions and finish are important. Share the tube shape, outside dimensions, wall thickness, grade, length and surface requirements for the application.

Product specifications
CR Pipes specification guide
Product form Round or specified hollow section
Material / condition Cold-rolled steel
Dimensions to specify Section shape, outside dimensions and wall thickness (mm)
Length / order details Required length, tolerances and surface condition
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative GI Pipes product photograph

GI Pipes

Galvanised iron pipes have a zinc-coated surface and are used in specified fabrication and service applications. Confirm the outside diameter, wall thickness or class, grade, end connection and coating requirements; suitability depends on the intended service.

Product specifications
GI Pipes specification guide
Product form Zinc-coated round pipe
Material / condition Galvanised steel
Dimensions to specify Outside diameter and wall thickness or specified pipe class
Length / order details Required length, coating requirement and end connection
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative GP Pipes product photograph

GP Pipes

GP pipes and tubes are generally formed from pre-galvanised strip for light framing and fabrication. Specify the section shape, outside dimensions, thickness, length and coating requirements, including any project requirements for weld-area protection.

Product specifications
GP Pipes specification guide
Product form Pre-galvanised hollow section
Material / condition Pre-galvanised steel strip
Dimensions to specify Section shape, outside dimensions and wall thickness (mm)
Length / order details Required length; confirm coating and weld-area requirements
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative MS Strip product photograph

MS Strip

Mild steel strip is flat steel supplied in narrower widths for fabrication, forming and further processing. Send the width, thickness, grade and quantity, and confirm whether straight lengths or coil form are required.

Product specifications
MS Strip specification guide
Product form Flat strip in specified supply form
Material / condition Mild steel
Dimensions to specify Width × thickness (mm)
Length / order details Specify coil or straight length, length/coil details and quantity
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

CATEGORY 05

Plates, Sheets & Roofing

From base plates to the roof above.

View category
Illustrative MS Plate product photograph

MS Plate

Mild steel plates provide flat material for base plates, welded assemblies, industrial fabrication and general construction. Enquire with the thickness, width, length, grade and quantity, including cutting tolerances or documentation requirements where specified.

Product specifications
MS Plate specification guide
Product form Flat steel plate
Material / condition Mild steel
Dimensions to specify Thickness × width × length (mm)
Length / order details Full plate or specified cutting dimensions and quantity
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Cut Piece Plate product photograph

Cut Piece Plate

Cut-piece plates provide specified plate dimensions for components, base plates and fabrication jobs. Share the material grade, thickness, cutting drawing, edge requirements and quantity so availability and the required cutting arrangement can be discussed.

Product specifications
Cut Piece Plate specification guide
Product form Plate cut to specified geometry
Material / condition Steel; grade to be specified
Dimensions to specify Thickness and cutting drawing dimensions (mm)
Length / order details Cutting tolerance, edge requirements and piece count
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative GC Sheet product photograph

GC Sheet

Galvanised corrugated sheets combine a formed roofing profile with a zinc-coated steel surface. Specify the sheet thickness, corrugation profile, coverage width, length and coating requirement, with the fixing and support details from your roof design.

Product specifications
GC Sheet specification guide
Product form Corrugated roofing sheet
Material / condition Galvanised steel
Dimensions to specify Thickness, corrugation profile and effective cover width
Length / order details Sheet length, coating designation and required quantity
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Deck Sheet product photograph

Deck Sheet

Profiled steel deck sheets are used in floor and roof assemblies according to the system design. Enquire with the profile, thickness, effective cover width, length and coating; load capacity and any composite action require project-specific design.

Product specifications
Deck Sheet specification guide
Product form Profiled deck sheet
Material / condition Steel; finish to be specified
Dimensions to specify Profile depth, base-metal thickness and effective cover width
Length / order details Required sheet length and the approved deck-system specification
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Profile Sheet product photograph

Profile Sheet

Profiled steel sheets are used for roofing and wall cladding in sheds and buildings. Share the profile, base-metal thickness, coating or colour, effective cover width and length, along with any matching trim or accessory requirements.

Product specifications
Profile Sheet specification guide
Product form Profiled roofing or cladding sheet
Material / condition Steel; coating to be specified
Dimensions to specify Profile, base-metal thickness and effective cover width
Length / order details Sheet lengths, colour/coating and matching trim requirements
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

CATEGORY 06

Wire, Mesh & Fencing

Solutions for tying, reinforcing and enclosing.

View category
Illustrative Wire Rod product photograph

Wire Rod

Wire rod is rolled steel supplied in coils for drawing and other downstream manufacturing processes. Specify the grade or chemistry, rod diameter, coil requirements and tonnage so the material enquiry matches your processing application.

Product specifications
Wire Rod specification guide
Product form Rolled wire rod in coils
Material / condition Steel
Dimensions to specify Rod diameter (mm)
Length / order details Coil details, chemistry/grade and required tonnage
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Binding Wire product photograph

Binding Wire

Binding wire is used to tie reinforcement bars and secure selected construction assemblies. Share the wire diameter or gauge, required finish, coil or pack size and quantity; tying wire does not replace the reinforcement specified in a design.

Product specifications
Binding Wire specification guide
Product form Plain tying wire in coils or packs
Material / condition Steel
Dimensions to specify Wire diameter (mm), or gauge with the gauge system stated
Length / order details Wire condition, pack/coil size and required weight
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Barbed Wire product photograph

Barbed Wire

Barbed wire is used as part of boundary and perimeter fencing systems. Enquire with the line-wire and barb diameters, barb spacing, coating, roll length and quantity, together with the installation requirements for the site.

Product specifications
Barbed Wire specification guide
Product form Twisted barbed fencing wire
Material / condition Steel; finish to be specified
Dimensions to specify Line/barb wire diameters, barb spacing and roll length
Length / order details Required coating, roll quantity and fencing specification
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative HB Wire product photograph

HB Wire

Hard bright wire is drawn steel wire used in selected forming, mesh, nail and fabrication processes. Specify the wire diameter, grade, mechanical requirements, surface finish and coil quantity for your intended manufacturing operation.

Product specifications
HB Wire specification guide
Product form Drawn hard-bright wire
Material / condition Steel
Dimensions to specify Wire diameter (mm)
Length / order details Mechanical condition, surface finish, coil details and quantity
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Weld Mesh product photograph

Weld Mesh

Welded wire mesh has intersecting wires joined at regular spacings for fencing, enclosures and specified construction uses. Share the wire diameter, mesh opening, sheet or roll dimensions, finish and applicable project standard.

Product specifications
Weld Mesh specification guide
Product form Welded wire grid
Material / condition Steel wire
Dimensions to specify Wire diameter × mesh opening; sheet or roll dimensions
Length / order details Required finish and sheet/roll quantities
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Chainlink product photograph

Chainlink

Chain-link mesh uses interwoven wire to form fencing for boundaries, compounds and enclosures. Specify the mesh opening, wire diameter, fence height, roll length and coating, with post and fixing requirements supplied separately where needed.

Product specifications
Chainlink specification guide
Product form Woven diamond mesh
Material / condition Steel wire
Dimensions to specify Wire diameter, mesh opening, fence height and roll length
Length / order details Coating, roll quantity and any separate posts/fittings
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

CATEGORY 07

Galvanised Products

Zinc-coated steel for your application.

View category
Illustrative GI Wire product photograph

GI Wire

Galvanised iron wire has a zinc-coated surface and is used in fencing, tying and wire-product fabrication. Confirm the diameter or gauge, grade, coating requirement, coil size and quantity for the intended environment and application.

Product specifications
GI Wire specification guide
Product form Zinc-coated plain wire
Material / condition Galvanised steel
Dimensions to specify Wire diameter (mm), or gauge with the gauge system stated
Length / order details Coating requirement, coil/pack size and required weight
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Galvanizing & Fabrication product photograph

Galvanizing & Fabrication

Discuss requirements for fabricated steel items and galvanising against your drawings and coating specification. Share the base material, dimensions, fabrication details, surface preparation and quantities so processing scope and supply arrangements can be confirmed.

Product specifications
Galvanizing & Fabrication specification guide
Product form Drawing-defined fabricated item / processing enquiry
Material / condition Steel; base material to be specified
Dimensions to specify Fabrication drawing and finished dimensions
Length / order details Confirm fabrication scope, coating requirement and quantities
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

CATEGORY 08

Scaffolding & Fabrication

Components that support the work in progress.

View category
Illustrative Scaffolding product photograph

Scaffolding

Steel scaffolding components are used in temporary access and working-platform systems designed for the site. Share the system type, component schedule, dimensions, grade and finish; compatibility, loading and erection must follow the approved scaffolding plan.

Product specifications
Scaffolding specification guide
Product form Components for a specified scaffolding system
Material / condition Steel; grade to be specified
Dimensions to specify System/component type, tube sizes and assembly dimensions
Length / order details Approved component schedule, compatibility and finish requirements
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Galvanizing & Fabrication product photograph

Galvanizing & Fabrication

Discuss requirements for fabricated steel items and galvanising against your drawings and coating specification. Share the base material, dimensions, fabrication details, surface preparation and quantities so processing scope and supply arrangements can be confirmed.

Product specifications
Galvanizing & Fabrication specification guide
Product form Drawing-defined fabricated item / processing enquiry
Material / condition Steel; base material to be specified
Dimensions to specify Fabrication drawing and finished dimensions
Length / order details Confirm fabrication scope, coating requirement and quantities
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Foundation Bolts product photograph

Foundation Bolts

Foundation bolts connect equipment bases or structural base plates to concrete foundations. Send the approved bolt drawing, diameter, embedment and overall length, bend or head form, grade, finish and quantities for your anchoring enquiry.

Product specifications
Foundation Bolts specification guide
Product form Drawing-defined anchor bolt
Material / condition Steel; bolt grade to be specified
Dimensions to specify Diameter, overall length, embedment and bend/head dimensions (mm)
Length / order details Approved bolt drawing; nuts, washers and finish requirements
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Thread Rods product photograph

Thread Rods

Threaded rods provide an adjustable connection for assemblies, supports and anchoring arrangements. Share the diameter, thread pitch, length, strength grade and finish, together with matching nut or washer requirements.

Product specifications
Thread Rods specification guide
Product form Fully threaded rod
Material / condition Steel; strength grade to be specified
Dimensions to specify Thread diameter × pitch × overall length (mm)
Length / order details Required thread system, length and matching hardware
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative MS Flat product photograph

MS Flat

Mild steel flat bars have a rectangular cross-section suited to straps, brackets, grills and general fabrication. Share the width, thickness, length, grade and quantity, plus any cutting or finishing requirements.

Product specifications
MS Flat specification guide
Product form Solid rectangular flat bar
Material / condition Mild steel
Dimensions to specify Width × thickness (mm)
Length / order details Required bar length and cutting requirements
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Slotted Angle product photograph

Slotted Angle

Slotted angles have regularly spaced openings for bolted racks, shelving and light framing assemblies. Enquire with the leg dimensions, thickness, slot pattern, finish and length; loading and bracing should follow the assembly design.

Product specifications
Slotted Angle specification guide
Product form Perforated L-shaped section
Material / condition Steel
Dimensions to specify Leg dimensions × thickness; slot size and spacing (mm)
Length / order details Required length and slot pattern; use the assembly design
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

CATEGORY 09

Road Safety & Infrastructure

Steel requirements for the road ahead.

View category
Illustrative MS Rail product photograph

MS Rail

Steel rail sections are used in selected industrial track and material-handling applications. Share the exact rail profile or drawing, section weight, grade, length and intended use so the supply enquiry reflects your project requirements.

Product specifications
MS Rail specification guide
Product form Rail section to specified profile
Material / condition Steel
Dimensions to specify Rail designation/profile, section weight and dimensions
Length / order details Required length and intended industrial application
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Crash Barrier product photograph

Crash Barrier

Steel crash-barrier components form part of engineered road-restraint systems. Enquire with the approved profile, beam and post dimensions, thickness, coating, hardware schedule and applicable highway or project standard rather than selecting components by appearance alone.

Product specifications
Crash Barrier specification guide
Product form Road-restraint components to approved profile
Material / condition Steel; grade to be specified
Dimensions to specify Beam profile, post dimensions, thickness and hole layout
Length / order details Approved highway/project specification, coating and hardware schedule
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Foundation Bolts product photograph

Foundation Bolts

Foundation bolts connect equipment bases or structural base plates to concrete foundations. Send the approved bolt drawing, diameter, embedment and overall length, bend or head form, grade, finish and quantities for your anchoring enquiry.

Product specifications
Foundation Bolts specification guide
Product form Drawing-defined anchor bolt
Material / condition Steel; bolt grade to be specified
Dimensions to specify Diameter, overall length, embedment and bend/head dimensions (mm)
Length / order details Approved bolt drawing; nuts, washers and finish requirements
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

CATEGORY 10

Fasteners & Small Steel Products

The small components behind strong connections.

View category
Illustrative MS Nails product photograph

MS Nails

Mild steel nails are used for general fastening in timber, packaging and selected construction tasks. Specify the nail length, shank diameter, head type, finish and pack quantity to match the material and fixing application.

Product specifications
MS Nails specification guide
Product form Headed steel nail
Material / condition Mild steel
Dimensions to specify Length × shank diameter; head type
Length / order details Required finish, packing and quantity
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Thread Rods product photograph

Thread Rods

Threaded rods provide an adjustable connection for assemblies, supports and anchoring arrangements. Share the diameter, thread pitch, length, strength grade and finish, together with matching nut or washer requirements.

Product specifications
Thread Rods specification guide
Product form Fully threaded rod
Material / condition Steel; strength grade to be specified
Dimensions to specify Thread diameter × pitch × overall length (mm)
Length / order details Required thread system, length and matching hardware
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Foundation Bolts product photograph

Foundation Bolts

Foundation bolts connect equipment bases or structural base plates to concrete foundations. Send the approved bolt drawing, diameter, embedment and overall length, bend or head form, grade, finish and quantities for your anchoring enquiry.

Product specifications
Foundation Bolts specification guide
Product form Drawing-defined anchor bolt
Material / condition Steel; bolt grade to be specified
Dimensions to specify Diameter, overall length, embedment and bend/head dimensions (mm)
Length / order details Approved bolt drawing; nuts, washers and finish requirements
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

CATEGORY 11

Raw Material & Semi-Finished Steel

Material for the next stage of manufacturing.

View category
Illustrative Billet product photograph

Billet

Steel billets are semi-finished solid sections used as feedstock for rolling and further processing. Share the steel grade or chemical composition, cross-section, length, required tonnage and inspection or documentation requirements for your manufacturing process.

Product specifications
Billet specification guide
Product form Solid semi-finished section
Material / condition Steel
Dimensions to specify Cross-section dimensions × length (mm)
Length / order details Chemistry/grade, inspection requirements and tonnage
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative Wire Rod product photograph

Wire Rod

Wire rod is rolled steel supplied in coils for drawing and other downstream manufacturing processes. Specify the grade or chemistry, rod diameter, coil requirements and tonnage so the material enquiry matches your processing application.

Product specifications
Wire Rod specification guide
Product form Rolled wire rod in coils
Material / condition Steel
Dimensions to specify Rod diameter (mm)
Length / order details Coil details, chemistry/grade and required tonnage
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative MS Strip product photograph

MS Strip

Mild steel strip is flat steel supplied in narrower widths for fabrication, forming and further processing. Send the width, thickness, grade and quantity, and confirm whether straight lengths or coil form are required.

Product specifications
MS Strip specification guide
Product form Flat strip in specified supply form
Material / condition Mild steel
Dimensions to specify Width × thickness (mm)
Length / order details Specify coil or straight length, length/coil details and quantity
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative HRPO Slit Coils product photograph

HRPO Slit Coils

Hot-rolled pickled and oiled slit coils provide narrow steel strip for forming and component manufacture. Specify the grade, thickness, slit width, width tolerance, coil weight and internal diameter, along with surface and processing requirements.

Product specifications
HRPO Slit Coils specification guide
Product form Hot-rolled pickled-and-oiled slit coil
Material / condition Steel
Dimensions to specify Thickness × slit width (mm)
Length / order details Width tolerance, coil weight and inside/outside diameter requirements
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative GP Slit Coils product photograph

GP Slit Coils

Pre-galvanised slit coils provide zinc-coated steel strip in specified widths for roll forming and fabrication. Share the base-metal thickness, slit width, grade, coating designation, coil weight and internal diameter for your production line.

Product specifications
GP Slit Coils specification guide
Product form Pre-galvanised slit coil
Material / condition Zinc-coated steel
Dimensions to specify Base-metal thickness × slit width (mm)
Length / order details Coating designation, coil weight and inside/outside diameter requirements
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative CRCA Slit Coils product photograph

CRCA Slit Coils

Cold-rolled close-annealed slit coils are used in forming, pressed parts and component manufacture. Enquire with the grade, thickness, slit width, temper or mechanical requirements, finish and coil details to suit the intended forming operation.

Product specifications
CRCA Slit Coils specification guide
Product form Cold-rolled close-annealed slit coil
Material / condition Steel
Dimensions to specify Thickness × slit width (mm)
Length / order details Grade/temper, surface condition, coil weight and diameter requirements
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Illustrative CRFH Slit Coils product photograph

CRFH Slit Coils

Cold-rolled full-hard slit coils are supplied for processing routes that specify this material condition. Confirm the grade, thickness, width, hardness or mechanical requirements and coil details; suitability for forming depends on the downstream process.

Product specifications
CRFH Slit Coils specification guide
Product form Cold-rolled full-hard slit coil
Material / condition Steel
Dimensions to specify Thickness × slit width (mm)
Length / order details Hardness/mechanical requirements, coil weight and diameter requirements
Grade & standard State the required grade and applicable standard or approved drawing.
Finish & tolerances Confirm the required finish/coating and dimensional tolerances with the quotation.
Brand & documentation Request the required mill/brand, inspection and material documents when enquiring.

Available sizes, grades, lengths, brands and documents are confirmed against your enquiry.

Your material list. Our next conversation.

Send sizes, grades, quantities and your delivery location.

Request a quotation
Chat with us